Specialty Wood Finishes

Additives & Touch Up - SDS



DSI Distributes M.L. Campbell Specialty Wood Finishes, Additives, Touch Up to:

DSI Pittsburgh, PA, DSI Cleveland, OH, DSI Millersburg, OH, DSI Columbus, OH, DSI Cincinnati, OH, DSI Detroit, MI, DSI Louisville, KY and DSI Indianapolis, IN.

>Back to M.L. Campbell Products

M.L. Campbell also offers specialty finishes, touch-up products, additives, reducers, retarders and catalysts to meet all of your wood finishing needs.

SPECIALTY FINISHES

Crackle Plus

Crackle Plus is a clear tint base designed to be added to M.L. Campbell solvent-based pigmented finishes to produce a crackle appearance. When crackle coat is to be a deep color, use M.L. Campbell Crackle F5565.

Crackle Plus - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Crackle Plus - SKU NO. - F5552

  • Crackle Plus - PRODUCT INFORMATION SHEETS

  • Crackle Plus - SKU NO. - F5552

  • Crackle Lacquer

    Crackle Lacquer F5565 is a clear tint base that can be tinted to multiple colors for use on interior wood and MDF surfaces. When crackle coat is to be white or light color, use M.L. Campbell Crackle Plus F5552.

    Crackle Lacquer - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Crackle Lacquer - SKU NO. - F5565

    Crackle Lacquer - PRODUCT INFORMATION SHEETS

  • Crackle Lacquer - SKU NO. - F5565

    Crack-L-ite

    Crack-L-ite is a crackle medium that can be tinted to multiple colors for use on interior wood and MDF surfaces. This product is ideal for in demand spot crackling. Create startling crackle effects and save time by applying “wet-on-wet” as described below! Can also be applied to recently dried vinyl base coats or N/C basecoats. Crack-L-ite provides a sophisticated, subtle crackle that is not achieved with other crackle products. Application is by spray gun. This low relief, subtle crackle appearance is a lighter look than traditional crackle products.

    Crack-L-ite - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Crack-L-ite - SKU NO. - F5551

  • Crack-L-ite - PRODUCT INFORMATION SHEETS

  • Crack-L-ite - SKU NO. - F5551

  • Proxpeel Strippable Booth Coating White

    Proxpeel White is a peelable liquid plastic spray booth and masking coating, supplied at spraying viscosity. Proxpeel offers excellent spray characteristics, dries in 10-15 minutes under normal room temperature conditions and is removable in large sheets.

    Proxpeel Strippable Booth Coating White - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Proxpeel Strippable Booth Coating White - SKU NO. - P8399030

  • Proxpeel Strippable Booth Coating White - PRODUCT INFORMATION SHEETS

  • Proxpeel Strippable Booth Coating White - SKU NO. - P8399030

  • ADDITIVES

    Flattening Compound for Post-Cat Finishes

    Flattening base is a high efficient flattening paste for use in post-catalyzed and precatalyzed topcoats. Features easy stir in and soft settling. This product is suggested for evaluation. You must determine its suitability and thoroughly quality it for your intended purpose. To use, stir the flattening paste into lacquer until well dispersed. For best results, should only be used in the finish coat. Do not attempt to drop sheen more than 1 sheen level, ex: Gloss to Semi Gloss is ok, but Gloss to Dull is not recommended. Refer to M.L. Campbell Gloss Reduction Chart percentages required.

    Flattening Compound for Post-Cat Finishes - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Flattening Compound for Post-Cat Finishes - SKU NO. - C15801

  • Flattening Compound for Post-Cat Finishes - PRODUCT INFORMATION SHEETS

  • Flattening Compound for Post-Cat Finishes - SKU NO. - C15801

  • Flattening Compound for Nitrocellulose

    Flattening Base is an efficient flattening paste for use in conventional nitrocellulose lacquers. NOT for use in pre-catalyzed or post catalyzed lacquers. This product is suggested for evaluation. You must determine its suitability and thoroughly quality it for your intended purpose. To use, stir the flattening paste into lacquer until well dispersed. For best results, should only be used in the finish coat. Do not attempt to drop sheen more than 1 sheen level, ex: Gloss to Semi Gloss is ok, but Gloss to Dull is not recommended. Refer to M.L. Campbell Gloss Reduction Chart percentages required.

    Flattening Compound for Nitrocellulose - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Flattening Compound for Nitrocellulose - SKU NO. - PN92277

  • Flattening Compound for Nitrocellulose - PRODUCT INFORMATION SHEETS

  • Flattening Compound for Nitrocellulose - SKU NO. - PN92277

  • Lacquer Fish Eye Killer

    Designed to help eliminate fish eye and help provide a smooth finish.

    Lacquer Fish Eye Killer - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Lacquer Fish Eye Killer - SKU NO. - WR5

  • Natural Paste Wood Filler

    Fast Dry Paste Wood Filler is an excellent fast dry alkyd paste wood filler for use on open grain woods to fill open pores and has easy wiping.

    Natural Paste Wood Filler - SDS - MSDS MATERIAL SAFETY DATA SHEETS
  • SDS - Natural Paste Wood Filler - SKU NO. - C211 3

  • Natural Paste Wood Filler - PRODUCT INFORMATION SHEETS
  • Natural Paste Wood Filler - SKU NO. - C211 3

  • TOUCH UP

    DesignRclassic
    12 ounce aerosol spray cans of clear lacquer finishes and shading lacquer toners. Fast, easy and convenient to use with no application equipment required. The four toner colors are specially-formulated to cover many of your requirements for touch up and furniture repair colors.

  • DesignRclassic - SKU NO. - WZX

  • >Back to M.L. Campbell Products

    Call DSI at 800-745-1778 or e-mail sales@maildsi.com to place your order. Products, availability and technical specifications are subject to change.