M.L. Campbell Finish Solvent Reducers

Material Safety Data Sheets - SDS


Tap to Call DSI: 1-800-745-1778
Click Here to Text DSI

DSI Distributes M.L. Campbell Wood Finish Solvent Reducers to:

DSI Pittsburgh, PA, DSI Cleveland, OH, DSI Millersburg, OH, DSI Columbus, OH, DSI Cincinnati, OH, DSI Detroit, MI, DSI Louisville, KY and DSI Indianapolis, IN.

>Back to M.L. Campbell Products

M.L. Campbell also offers specialty finishes, touch-up products, additives, reducers, retarders and catalysts to meet all of your wood finishing needs.

Standard Lacquer Thinner
A high-quality special blend of solvents specifically designed to be an excellent reducer for nitrocellulose, pre-catalyzed, post-catalyzed, butyrate, and acrylic lacquers. It is tolerant of a wide range of poor application conditions, and will maintain good dry, flow, and blush resistance. Has a minimum tendency to raise the wood grain. The combination of properties minimizes the sanding required on lacquer sealer and between finish coats.

Standard Lacquer Thinner - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Standard Lacquer Thinner - SKU NO. - C160 36

    • Care Reducer

    A premium blend of special medium evaporating solvents designed for specifically for reducing HAPs free pre-catalyzed and post-catalyzed finishes. The addition of small amounts will correct most leveling and flow problems. Contains no aromatic or ketone solvents.

    Care Reducer - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Care Reducer - SKU NO. - C162 1

    • Care Reducer - PRODUCT INFORMATION SHEETS

  • Care Reducer - SKU NO. - C162 1

    • Fast Lacquer Thinner

    An economy blend of solvents specifically designed to be used as a clean up solvent for nitrocellulose, pre-catalyzed, post-catalyzed, butyrate and acrylic lacquers. If used in our products, Fast Lacquer Thinner may cause flow, leveling and bubbling issues; therefore, it is recommended that it be used as a gun cleaner.

    Fast Lacquer Thinner - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Fast Lacquer Thinner - SKU NO. - C189 36

    • Fast Lacquer Thinner - PRODUCT INFORMATION SHEETS

  • Fast Lacquer Thinner - SKU NO. - C189 36

    • Flow Enhancer

    Premium slow reducers specially formulated for conditions of high heat and humidity. Consist of a quality blend of Glycol Ethers and Ester Solvents. Will effectively help to enhance the flow of our products and help to reduce bubbling and blushing caused by the effects of high heat and humidity during application. Flow Enhancer 1 will reduce dry spray and both will reduce lapping.

    Flow Enhancers - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - Flow Enhancer 1 - SKU NO. - C162
  • SDS - Flow Enhancer 2 - SKU NO. - C163

    • Flow Enhancers - PRODUCT INFORMATION SHEETS

  • Flow Enhancer 1 - SKU NO. - C162
  • Flow Enhancer 2 - SKU NO. - C163

    • Medium Reducer VOC Exempt

    A blend of compliant VOC exempt solvents designed to improve flow and leveling in moderate heat and humidity conditions. Recommended for use with any of our low VOC coatings to improve flow and level.

    Medium Reducer VOC Exempt - SDS - MSDS MATERIAL SAFETY DATA SHEET
  • SDS - Medium Reducer VOC Exempt - SKU NO. - VC1681

    • Fast Reducer VOC Exempt

    A high quality VOC compliant acetone meant for reducing low VOC solvent borne coatings. Should also be used as a general purpose clean up solvent.

    Fast Reducer VOC Exempt - SDS - MSDS MATERIAL SAFETY DATA SHEET

  • SDS - Fast Reducer VOC Exempt - SKU NO. - V16936

    • Fast Reducer VOC Exempt - PRODUCT INFORMATION SHEETS

  • Fast Reducer VOC Exempt - SKU NO. - V16936


    • Euro Reducer

    A blend of special evaporating solvents specifically formulated for Euro Series two-component polyurethane products. Intended to correct most leveling and flow problems. Euro Reducer contains no aromatic or ketone solvents.

    Euro Reducer VOC Exempt - SDS - MSDS MATERIAL SAFETY DATA SHEET

  • SDS - Euro Reducer - SKU NO. - EU31197

    • Euro Reducer VOC Exempt - PRODUCT INFORMATION SHEETS

  • Euro Reducer - SKU NO. - EU31197

    • EuroBild® Epoxy Reducer

    A special HAPS-free reducer required for thinning EuroBild Epoxy Sealer that also includes additives that reduce bubbles during application. Due to the high solids nature of the EuroBild Epoxy Sealer, this solvent reducer must be used for optimum application and performance characteristics of the coating.

    EuroBild® Epoxy - SDS - MSDS MATERIAL SAFETY DATA SHEETS

  • SDS - EuroBild® Epoxy Reducer - SKU NO. - EU35797
  • EuroBild® Epoxy Sealer - SKU NO. - EU35779

    • EuroBild® Epoxy - PRODUCT INFORMATION SHEETS

  • EuroBild® Epoxy Reducer - SKU NO. - EU35797
  • EuroBild® Epoxy Sealer - SKU NO. - EU35779

    • >Back to M.L. Campbell Products

    Call DSI at 800-745-1778 or e-mail sales@maildsi.com to place your order. Products, availability and technical specifications are subject to change.