Agualente® PLUS White/Opaque Base
Material Safety Data Sheets - SDS
Tap to Call DSI: 1-800-745-1778
DSI Distributes M.L. Campbell Wood Finishing Agualente® PLUS White/Opaque Base in DSI Pittsburgh, PA, DSI Cleveland, OH, DSI Millersburg, OH, DSI Columbus, OH, DSI Cincinnati, OH, DSI Detroit, MI, DSI Louisville, KY and DSI Indianapolis, IN.
>Back to M.L. Campbell ProductsAgualente® PLUS White/Opaque Base is a pre-catalyzed low VOC, water borne coating for interior wood surfaces. This GREENGUARD Certified coating is based on advanced resin technology that mirrors its solvent-based counterpart – pre-catalyzed lacquer.
This proprietary technology allows Agualente® PLUS White/Opaque Base to dry quickly and produces no hazardous off-gassing during cure. Agualente® PLUS White/Opaque Base is available in a full range of sheens and can be tinted to 1,000+ colors, which makes it ideal for kitchen and bath cabinets, household or office furniture, display fixtures, paneling or general interior wood surfaces. Agualente® PLUS White/Opaque Base passes all KCMA tests, AWI System 2, Pre-catalyzed Lacquer and System 8, Water Base Acrylic Cross Linking chemical and moisture resistance tests.
Agualente Plus Water Borne Pre-Cat Pigmented Lacquer - SDS - MSDS MATERIAL SAFETY DATA SHEET
Key Features of Agualente® PLUS White/Opaque Base
Agualente® PLUS White/Opaque Base Test and Performance Characteristics
Agualente® PLUS White/Opaque Base has undergone rigorous quality testing to verify performance and application characteristics. The M.L. Campbell® laboratory has formulated Agualente® PLUS to meet or exceed the required performance level established by KCMA for finishes. Agualente® PLUS has been tested utilizing the following ASTM and KCMA test methods: 5 = Excellent, 4 = Very Good, 3 = Good, 2 = Fair, 1 = Poor.RESULTS:
Chemical Resistance Evaluation
Purpose: Test the ability of the finish to withstand substances typically found in kitchens and bathrooms. Agualente® PLUS Clear exceeds AWI specifications for System 2 pre-catalyzed lacquer and System 8 water-based acrylic cross-linking chemical resistance. Contact and dry time of each chemical is in accordance to AWI and KCMA test procedures.
RESULTS:
>Back to M.L. Campbell Products